PTFE Release Fabrics
Release Ease® PTFE coated fiberglass fabrics will provide release from all conventional resin systems. Porous products will allow excess resin, volatiles and trapped air to escape into the breather during cure while non-porous products will retain resin. Release Ease® products have a continuous service temperature to 550°F (288°C).
- Release coating reduces the effort required to remove peel ply from laminate.
- Peel plies strip off of cures laminates leaving a textured surface, reducing time spent hand finishing.
- Fiberglass retains its strength through high temperature cures and post cures for easier removal after cure.
| Name | Material type | Release coating | Maximum use temperature | Color |
|---|---|---|---|---|
| Release Ease® 234 TFP | Fiberglass | PTFE Porous | 288°C (550°F) | Brown |
| Release Ease® 234 TFP-HP | Fiberglass | PTFE Porous | 288°C (550°F) | Brown |
| Release Ease® 234 TFP-1 | Fiberglass | PTFE Porous | 288°C (550°F) | Brown |
| Release Ease® 234 TFNP | Fiberglass | PTFE | 288°C (550°F) | Brown |
| Release Ease® 236 TFNP | Fiberglass | PTFE | 288°C (550°F) | Brown |